Standard Sets

Standard sets come with 12 pre-programmed configurations you can immediately start to work with:

1 B asic Pellet Stove
2 Pellet Stove with 2nd Ambient Fan
3 Water Stove with automatic chamber cleaning
4 Basic Pellet Boiler
5 Pellet Boiler with automatic chamber cleaning
6 Pellet Boiler with Back Water management
7 Pellet Boiler with automatic combustion chamber and ash extraction
8 Basic Pellet Burner
9 Pellet Burner with water pump management and compressed air cleaning
10 Basic Firewood Boiler
11 Combined Boiler (Firewood/pellets) with automatic chamber cleaning
12 Firewood boiler with back water management

Fumis ALPHA user interfaces

• 
• 
• 
• 
• 
• 

Fumis ALPHA color samples

• 
• 
• 

 

 

Customization

Mass-customization

With Fumis ALPHA you have available numerous customisation possibilities in order to give manufacturers the possibility to customize the appearance and functionality of the product for various market segments and niches.

Design

Especially in the stove market where the product is commonly situated in living rooms the appearance and design of the device is a key factor when consumers decide which product to purchase. With Fumis ALPHA you can adapt the design of the user interface to get a perfect fit with your device design style (modern or retro) and color.

Functionality

Various markets request different functionalties. With Fumis ALPHA it is easy for manufacturers to offer a customised product for these niches. You can activate the Eco-function that will help customers save on fuel costs, you can give them the possibilty to select the fuel quality, visualise the autonomy, enable or disable manual feeding and others. With just a few clicks you can create a specific product that will perfectly fit to a specific market segment needs. 

Fumis ALPHA biomass combustion controllers have available an extensive range of Optional Units that add functionality to your heating system and accessories to create the perfect fit with your application.

Fumis Software Tools

Fumis puts customers in total control of their products covering their needs from R&D and production to remote managing of units on the field. Fumis Software tools are:

• FUMIS PC-PRO: a set-up and parametrisation software for R&D usage;

FUMIS PC-PRO A COMPUTER SOFTWARE TOOL FOR PROFESSIONALS FUMIS PC-PRO is a set-up and parametrisation software for R&D and production usage. EASY-TO-USE, efficient way for PC-based control, monitoring and fine tuning of your heating system’s functionalities controlled by FUMIS products SMART: extensive software parametrisation within predefined applications set-ups SIMPLE setup for real-time monitoring of the heating device parameters SAFE: puts you in control of your custom settings USER PROFILE: R&D department (select and fine-tune the application, create and monitor test sequences with data-logging) Installation, service and maintenance needs (installation fine-tuning, counters and alarm check, re-programming, …) Production programming   NOTE: you need the uCOM Fumis  signal converter to safely connect your Fumis products with your computer.

Information Sheet

FUMIS_ALPHA_V2_FLYER_ENGLISH.pdf

FUMIS_ALPHA_V2_FLYER_ITALIANO.pdf

FUMIS_ALPHA_V2_FLYER_FRENCH.pdf

FUMIS_ALPHA_V2_FLYER_SPANISH.pdf

FUMIS_ALPHA_40_FLYER_ENGLISH.pdf

FUMIS_ALPHA-40_InfoSheet_SPANISH.pdf

FUMIS_Controller_Alpha_40_FR_WEB.pdf

FUMIS_ALPHA_41-42_FLYER_ENGLISH.pdf

FUMIS_ALPHA_41-42_FLYER_FRENCH.pdf

FUMIS_ALPHA_41-42_FLYER_SPANISH.pdf

FAQ

Q: Can FUMIS control a firewood boiler that applies wood gasification (pyrolitic combustion)?

A: Yes, FUMIS is being used for several different wood gasification boiler where it typically improves the performance by more than 30%.

Q: What is a »wood biomass heating system«?

A: It is a system that uses a fuel that is made of wood.

Q: What is »renewable energy«?

A: It is energy that comes from a source that can be renewed. In other words when the cycle is closed the impact on the CO2 level is neutral.

Q: Why is heating with biomass preventing global warming when the combustion still emits CO2?

A: Combustion of biomass is actually using energy of the sun that plants transformed in a combustible. Burning emits the CO2 that was used by the plant to grow the biomass and can be used again.

Q: What is the difference between pellets, briquettes, woodchips and firewood/logs?

A: FUMIS can control various heating system burning all the mentioned types of wood biomass. The most important technical differences between these types of wood biomass is the possibility to automate the feeding and burning process.

Q: Can FUMIS control pellet heating systems fuelled with non-wood biomass?

A: Yes, FUMIS products can control also the combustion of straw, corn and other solid biofuels.

Q: What is the benefit of using an underpressure sensor?

A: The benefit is that allows to implement an even more accurate control of the combustion and keep the heating system operating at maximum efficiency regardless of changes in chimney conditions, level of residues in the heating system and other variables that otherwise affect the performances.

Q: What is the benefit of using a lambda probe?

A: The benefit is in that the combustion control loop is based on the exact oxygen readings so the combustion is controlled in real time on actual performance. Available on FUMIS products as an option it is strongly recommended for heating systems using biomass fuel with inhomogeneous characteristics (specific energy, moisture content, etc.), especially woodchips.